ADMM classic

AD-Scan 4 (ADMM 4)

The ADMM 4 was developed for use inside engine compartment and optimized for the often limited space there. The dimensions of the module are only 93 x 30 x 46 mm.

The 4 bipolar voltage inputs with unipolar sensor supply provide a very good measurement accuracy. If required, an additional digital 6th order Butterworth filter can be activated. The filter threshold frequency is automatically adjusted to the measurement data rate with 2kHz / channel maximum or can be adjusted manually per channel.

The ADMM 4 is equipped with 6-pole LEMO 0B connectors for signal inputs and sensor excitation.

AD-Scan 8 (ADMM 8)

The ADMM 8 has 8 bipolar voltage inputs. The sensor supply is also bipolar and can be adjusted separately per channel. Measurement accuracy, galvanic isolation, filter and measurement data rates correspond with ADMM 4.

This module is particularly suitable for multi channel applications, where space is not so extremely limited, e.g. in the trunk or at test stands.
Measurements at test stands, even at totally unprotected places close to electric generators show no interferences. Due to the double number of channels compared to ADMM 4, the ADMM 8 has still a better price/channel, with the same excellent specifications.

By default ADMM 8 is equipped with the same 6-pole LEMO 0B connectors for signal inputs and sensor excitation, as ADMM 4. On request it is available with IPT compatible LEMO 1B connectors.

The ADMM 8 is also available with BNC connectors without sensor excitation.

Specifications
Model:	ADMM 4	ADMM 8 and ADMM 8 BNC
Inputs:	4	8
Measurement Ranges:	±0,1 V, ±0,5 V, ±10 V, ±20 V, ±60 V
Internal Sampling Rate per Channel	2000 Hz
Measurement Data Rate per Channel	1, 2, 5, 10, 50, 100, 500, 1000, 2000 Hz
Input Protection	±100 V permanent, additional ESD protection
SW Input Filter	Switchable 6th order Butterworth filter, range 0,1 Hz to 500 Hz, automatically adjusted to the measurement data rate, alternatively threshold frequency adjustable per channel
HW Input Filter	Low-pass filter 3rd order, 230 Hz	Low-pass filter 3rd order, 500 Hz
Sensor Excitation	5V, 8V, 10V, 12V, 15V DC max. 30mA per channel, switchable	±5V, ±8V, ±10V, ±12V, ±15V DC max. 30mA per channel, switchable and adjustable per channel
Galvanic Isolation	500 V DC
CAN Interface Configuration	CAN2.0B (active), High Speed (ISO 11898) 125 kBit/s up to 1 MBit/s, data transfer is free running Via CAN bus with CSM Config Tool or CSM INCA AddOn All settings and configuration data stored in module Alternatively configuration and data transfer using CANopen protocol
Power Supply	Approx. 5 V to 60 V DC
Power Consumption	Typ. 1,4 W (without sensor excitation)	Typ. 1.6 W (without sensor excitation)
Dimensions (W x H x D)	93 x 30 x 46 mm	200 x 35 x 50 mm
Weight	Approx. 230	Approx. 500 g
Housing	Gold anodized / BNC Version: blue anodized

Non UK/Ireland Customers

Non UK/Ireland Customers, please contact CSM at: www.csm.de/en/

We periodically send an email newsletter containing updates, new product releases, training and advice. If you would like to receive these please subscribe below.