Thermo-Scan MC 8 (THMC 8)
The device is configured as an 8-channel module with a single
Lemo 2B NiCr-Ni Multi-Connector. This module can be installed
in very small spaces.
The signal cable consists of thermocouple wires with Teflon
sheathing. The pins of the Multi-Connector are made of NiCr-Ni
material, which is very important for measurement accuracy. This
solution is preferred if modules often have to be changed
quickly.
Thermo-Scan 8 classic (THMM 8 classic)
The device is configured as an 8-channel module with 8 NiCr-Ni
Mini Thermo Connectors. The most cost effective, easy to use and
flexible solution for many applications.
| Specifications |
Model:
|
THMC 8 |
THMM 8 classic |
| Inputs: |
8 NiCr-Ni (Type K) |
Measurement Ranges:
|
-100 °C to +1372 °C
|
Internal Sampling Rate
per Channel |
1000 Hz |
| Measurement Data Rate per Channel |
1, 2, 5, 10 Hz |
| Input Protection |
±60 V permanent,
additional ESD protection |
| SW Input Filter |
FIR-Filter (Finite Impulse
Response).
Threshold frequency automatically adjusted to measurement data
rate |
| HW Input Filter |
Low-pass filter 15 Hz |
Low-pass filter 250 Hz |
| Broken sensor detection |
Yes |
| Cold junction compensation |
Internal reference per
channel |
Accuracy at 25 °C
Temperature Drift |
0.05 %
Typ. ±10 ppm/K |
| Galvanic Isolation |
500 V DC |
CAN Interface
Configuration |
CAN2.0B (active), High
Speed (ISO 11898)
125 kBit/s up to max. 1 MBit/s, data transfer is free
running
Via CAN bus with CSM Config Tool or CSM INCA AddOn,
All settings and configuration data are stored within module
Alternatively: Configuration and data transfer using CANopen
protocol |
| LED Power / Status |
LED: Power (green), Status
(red) |
| Power Supply |
Approx. 5 V to 60 V
DC |
| Power Consumption |
Typ. 1.0 W
|
| Dimensions (W x H x D) |
35 x 29 x 100 mm |
120 x 37 x 50 mm
(Slide Case) |
| Weight |
Approx. 200 |
Approx. 300 g |
| Protection Class |
IP67 |
IP65 |
Non UK/Ireland
Customers
Non UK/Ireland Customers, please contact CSM at: www.csm.de/en/
We periodically send an email
newsletter containing updates, new product releases, training and
advice. If you would like to receive these please subscribe
below.
