Automotive & Industrial

Automotive & Industrial


With the PT-Scan MiniModule (PTMM) you have at your disposal an automotive test module for the adaptation of PT100 and PT1000 resistor elements.

The selection of the resistor element is configured individually per channel over the CSM ConfigTool software.

The PT-Scan MiniModule is particularly suitable for measurements with high precision requirements.

The PT-Scan MiniModule is designed for temperature measurement with PT100 and PT1000 RTD elements (Resistance Temperature Device).

RTD's are the preferred measurement sensor choice whenever an application requires the highest possible accuracy, and excellent long term stability. RTD's can also be a cost effective sensor choice when longer lead wires are required. (in those cases where the cost of additional lengths of thermocouple wires can become excessive).


Measurement range
Internal resolution
Internal sampling rate
Measuring data rate per channel
Input filter
Broken sensor detection
4 inputs for PT100 or PT1000 RTD elements,
Adjustable with ConfigTool as PT100 or PT1000

-50° C to +500° C (-58° F to 932 ° F)
16 bit
2 kHz
1, 2, 5, 10 Hz

Low-pass filter, additional digital filtering
Measurement accuracy:
at 25° C
Temperature drift

typ. 10 ppm/K
Galvanic insulation 500 V
CAN interface


CAN2 0B (active), High Speed (ISO11898)
125 kBit/s to max. 1 MBit/s, data transfer is free running

Via CAN-Bus with CSM ConfigTool or CSM INCA AddOn,
settings and configurations stored in the device
alternatively: configuration and data transfer via CANopen protocol
Power supply
Power consumption
6 V DC to50 V DC
Protection class
Weight approx
Dimensions (w x h x d)

Aluminium gold anodized
230 g, 300 g (Slide Case)
93 x 30 x 46mm,
120 x 37 x 50mm (Slide Case)
CAN / voltage
Signal inputs

CAN / voltage LEMO 0B 5-pole
Signal inputs LEMO 0B 6-pole
Operating temperature
-40° C to +85° C (-40° F to +185° F)

Non UK/Ireland Customers

Non UK/Ireland Customers, please contact CSM at:

We periodically send an email newsletter containing updates, new product releases, training and advice. If you would like to receive these please subscribe below.


  • Compact CAN bus measurement module, available in two different housings - for use in-vehicle and in test stands
  • 4 inputs for PT100 or PT1000 RTD elements, configurable via software
  • For precise temperature measurement under extreme conditions, where highest accuracy and long term stability is required; e.g. in test stands or on road trials
  • Operating temperature: -40° C to +85 ° C
  • Robust aluminium housing:
    waterproof, rugged housing: IP67
  • Outstanding price/performance ratio

PTMM Leaflet
Size: 128.9 KB (131,975 bytes)

Labcell Automotive Instrumentation Brochure
Size: 858.0 KB (878,610 bytes)

Quotation Request

Email us to request a quotation for the PTMM