The measurement device
HV Thermo-Scan MiniModul (HV THMM 4) is
especially designed for safe temperature measurements on
high-voltage components and is therefore excellently suited for
mobile and stationary use in the area of e-mobility (electric and
hybrid vehicles).
Tested safety from
the point of measurement to data acquisition
The complete system (HV THMM 4 and signal cables from SAB
Bröckskes) has been tested by an accredited laboratory and complies
with the device safety standard EN 61010.
| Specifications |
| Inputs |
4 NiCr-Ni (K type)
|
| Measurement ranges |
-100 ° C to +1372° C |
| Internal resolution |
16 bit |
Internal sampling rate per Channel
|
1000 Hz
|
Measurement data range per channel
|
1, 2, 5, 10 Hz
|
Reinforced insulation
Channel / channel
Channel / CAN
Channel / power supply
|
800V unipolar
800V unipolar
800V unipolar |
SW input filter
|
FIR filter (Finite Impulse Response)
Threshold frequency automatically adjusted to measurement data
rate |
HW input filter
|
Low-pass filer 150 Hz |
Accuracy at 25° C
|
typ. 0.05 % of measured value |
Temperature drift
|
typ. ± 10 ppm/K |
CAN interface
Configuration
|
CAN2.0B (active), High-Speed CAN (ISO 11898)
125 kBit/s to max. 1 MBit/s, data transfer is free running
Configuration via CAN bus using CSM ConfigTool or CSM INCA
AddOn
|
Connectors
EtherCAT / voltage
Signal inputs
|
LEMO 1B 8-pole
LEMO 1B 6-pole |
Power Supply
|
Approx. 6 V to 30 V DC
|
Power Consumption
|
1W
|
| Operating temperature |
-40 ° C to +100 ° C |
| Dimensions |
130 x 33 x 75mm
|
| Weight |
500 g |
| Protection Class |
IP67
|
Non UK/Ireland
Customers
Non UK/Ireland Customers, please contact CSM at: www.csm.de/en/
We periodically send an email
newsletter containing updates, new product releases, training and
advice. If you would like to receive these please subscribe
below.
